Blog

How Can Buyers Prevent Castor Mounting Hole Fit Problems?

7 September 2026

Castor mounting holes can fail assembly when their diameter, hole pattern, tolerance, or edge condition is not controlled together. This…

阅读更多 →

What Should Buyers Check When Castors Will Not Track Straight?

5 September 2026

Castors that make a trolley drift can have problems in the swivel bearing, wheel-bearing, wheel runout, mounting, load distribution, or…

阅读更多 →

What Causes Rubber Castor Wheels to Break Under Load?

4 September 2026

Rubber castor wheels can break under repeated load when tread variation, poor rim fit, weak retention, impact, or unsuitable test…

阅读更多 →

How Can Buyers Choose a Castor Brake That Operates Easily and Locks Firmly?

3 September 2026

Choosing a braked castor requires more than confirming that a brake is fitted. Buyers should define how easily the pedal…

阅读更多 →

Can Different Directional Locks Fit the Same Castor Housing?

2 September 2026

Different directional locks are not automatically interchangeable, even when their plates and front ends look similar. Compatibility depends on the…

阅读更多 →

Why Does a Swivel Castor Stop Swivelling in Cold Conditions?

31 August 2026

The castor wheel may still roll while its top plate and swivel assembly bind when grease stiffens, leaks, absorbs dust,…

阅读更多 →

How Can Buyers Prevent Loose Screws and Nuts on Bolt Hole Castors?

30 August 2026

Loose screws and nuts on bolt hole castors can create rework when a buyer uses the castor as delivered. This…

阅读更多 →

How Can Buyers Tell TPR and PP Castor Wheels Apart?

29 August 2026

TPR and PP castor wheels can serve different roles in one assembly. This article explains how to distinguish a TPR…

阅读更多 →

Why Do Plastic Thread Guards on TPR Castors Break During Transport?

28 August 2026

Plastic thread guards on TPR castors can break before use when a thin guard edge receives local impact, compression, or…

阅读更多 →

What Causes Noise in Castors Under Load?

27 August 2026

Castor noise that appears only under load often comes from a change in assembled clearances, wheel and axle movement, tread…

阅读更多 →

How Can Buyers Check Castor Wheel Wobble Before Delivery?

24 August 2026

Learn how to check castor wheel wobble before delivery by separating runout from axle, bearing, and assembly play using a…

阅读更多 →

Why Can a Castor Pass Component Inspection but Fail After Assembly?

23 August 2026

Learn why castors pass loose-part checks yet fail after assembly, and how buyers can define finished-state measurements, retention and release…

阅读更多 →

How Can Buyers Measure Castor Swivel Play and Set a Tolerance?

22 August 2026

Buyers can measure castor swivel play more consistently by separating it from wheel, axle, and mounting movement. This article explains…

阅读更多 →

Why Do Brake Springs Rust on Outdoor Furniture Castors?

21 August 2026

Brake springs on outdoor furniture castors can corrode before the housing because small moving parts may have different materials, finishes,…

阅读更多 →

Why Does Wheel Hub Length Matter When Replacing a Plain Bearing Wheel?

16 August 2026

Hub length determines how a plain-bearing castor wheel fits between the fork or housing plates, axle, washers, and spacers. A…

阅读更多 →

How Should Buyers Specify Castor Axle Tolerances for an Adjusting Ring?

15 August 2026

An adjusting ring can fail to pass over a castor axle even when the nominal diameter looks correct. This guide…

阅读更多 →